Excellence in Transducer Design
Load Cells : Force Sensors : Torque Sensors : Pressure Sensors
Load Cells : Force Sensors : Torque Sensors : Pressure Sensors
Load capacity from 10 to 200kN
• Range 10 to 200kN
• Stainless steel construction.
• Rugged and easily employed
• Sealed to IP67
Description
The 9000 bolt tension load cell has full environmental protection and is built for rugged applications. The load cell is constructed from high strength steel. A complete range covers the load capacities from 12 to 66te. with other sizes on request.Each load cell can be designed to suit standard metric set screws and bolts. The load cell is built to the highest commercial standards that include temperature compensation over a wide temperature range.
Specification
ELECTRICAL
• Recommended excitation 10 Vdc.
• Maximum excitation 15 Vdc.
• Output at rated load 2.0mV/V
• Zero balance 5% of RL
• Input impedance 1000ohms +/-20
• Output impedance 1000ohm +/-3
• Insulation >10^9ohms
• Compensation temp range 10 to 60 C
• Safe temp range -30 to 70 C
MECHANICAL
• Safe overload 150% of RL
• Ultimate overload 300% of RL
• Deflection <0.5mm
• Cable type 4 core screened
• Cable length 6 M
• Sealed IP67
Accuracy
• Non linearity & hysteresis 0.5%
• Non repeatability <0.05%
• Zero return (after 30 mins). 0.04%
• Temp effect/10deg C on zero 0.05%
• Temp effect/10deg C on span 0.03%
Wiring
Drawing
Dimensions
Additional Notes
Specification may change without notice
