Excellence in Transducer Design
Load Cells : Force Sensors : Torque Sensors : Pressure Sensors
Load Cells : Force Sensors : Torque Sensors : Pressure Sensors
Load capacity from 2 to 50te
• Range 2 to 50te
• Stainless steel construction.
• Rugged and easily employed
• Sealed to IP68
Description
The 6050 low profile load cell has full environmental protection and is built for rugged applications. The load cell is constructed from high strength stainless steel. A complete range covers the load capacities from 2 to 50 tonne. Each load cell assembly can be fitted with additional fitting. The cell is built to the highest commercial standards that include temperature compensation over a wide temperature range.
Specification
ELECTRICAL
• Recommended excitation 10 Vdc.
• Maximum excitation 15 Vdc.
• Output at rated load 2.0mV/V
• Zero balance 5% of RL
• Input impedance 700ohms +/-20
• Output impedance 700ohm +/-3
• Insulation >10^9ohms
• Compensation temp range 10 to 60 C
• Safe temp range -30 to 70 C
MECHANICAL
• Safe overload 150% of RL
• Ultimate overload 300% of RL
• Deflection <0.5mm
• Cable type 4 core screened
• Cable length 10 M
• Sealed IP68
Accuracy
• Non linearity & hysteresis 0.15%
• Non repeatability <0.05%
• Zero return (after 30 mins). 0.04%
• Temp effect/10deg C on zero 0.02%
• Temp effect/10deg C on span 0.02%
Wiring
Drawing
Dimensions
Additional Notes
Specification may change without notice
