6030 Low Profile Load Cell

Load capacity from 2 to 50te

• Range 2 to 50te
• Stainless steel construction.
• Rugged and easily employed
• Sealed to IP68

Description

The 6030 low profile load cell has full environmental protection and is built for rugged applications. The load cell is constructed from high strength stainless steel. A complete range covers the load capacities from 2 to 50 tonne. The base is machined with a left-hand thread so that it can be adjusted by turning the body. Each load cell can be fitted with loading eyes or other loading attachments. The load cell is built to the highest commercial standards that include temperature compensation over a wide temperature range.

Specification

ELECTRICAL

• Recommended excitation 10 Vdc.
• Maximum excitation 15 Vdc.
• Output at rated load 2.0mV/V
• Zero balance 5% of RL
• Input impedance 700ohms +/-20
• Output impedance 700ohm +/-3
• Insulation >10^9ohms
• Compensation temp range 10 to 60 C
• Safe temp range -30 to 70 C

MECHANICAL

• Safe overload 150% of RL
• Ultimate overload 300% of RL
• Deflection <0.5mm
• Cable type 4 core screened
• Cable length 10 M
• Sealed IP68

Accuracy

• Non linearity & hysteresis 0.15%
• Non repeatability <0.05%
• Zero return (after 30 mins). 0.04%
• Temp effect/10deg C on zero 0.02%
• Temp effect/10deg C on span 0.02%

Wiring

Drawing

Dimensions

Additional Notes

Specification may change without notice