2900 Marine Load Pin

Load capacity from 5 to 500te

Tensile or compressive load measurement : Easily enployed : Withstand harsh enviroments : High strength stainless steel load pin : Complete with protection cage : Fitted with marine connector


The 2900 marine pin is designed for each application and special features can be included. The pin is generally manufactured from high strength stainless steel and is issued with certified material certificates. The strain gauges are internally installed that is back filled with dielectric gel.



  • Recommended excitation 10 Vdc.
  • Maximum excitation 15 Vdc.
  • Output at rated load 1.5mV/V
  • Zero balance 5% of RL
  • Input impedance 700ohms +/-20
  • Output impedance 700ohms +/- 3
  • Insulation >10^9ohms
  • Compensation temp range 10 to 60 C
  • Safe temp range -30 to 70 C


  • Safe overload 150% of RL
  • Ultimate overload 300% of RL
  • Deflection <0.5mm
  • Cable type As specified
  • Cable length As specified
  • Sealing IP68


  • Non linearity & hystersis 1.0%
  • Non repeatability 0.5%
  • Zero return (after 30 mins). 0.08%
  • Temp effect/10deg C on zero 0.05%
  • Temp effect/10deg C on span 0.03%






Welcome to Active Load.

tel: +44 (0) 1491 680123

Active Load provides complete transducer solution designing and manufacturing strain gauge transducers.

Strain gauge transducers are designed to be Load Cells, Force Sensors, Torque Sensors, Pressure Transducers and any other strain related product.

Active Load will incorporate the strain gauge cells with a strain gauge amplifier to achieve an enhanced signal. Many of our strain gauge load cells are designed to be in the form of load monitoring pins to measure rope tension. Other forms taken are as load monitoring links and compressive load cell.