2600 Load Shackle



Load capacity from 50 to 500te

Tensile load measurement : Easily enployed : Withstand harsh enviroments : High strength stainless steel load pin : Complete with bobbin and anti-rotation plate : Fitted with integral cable.

Description

The 2600 load shackle has been designed for measuring tensile loads using double shear strain gauged element. The range is from 5 tonne to 100 tonne, with higher capacities available by request. The load pin is manufactured from high strength stainless steel and fitted with stainless steel bobbin and anti-rotation plate. The load cell is used for tempory or permanent rope tension applications, or for under hook weighing, particularly in rugged and harsh conditions.It can be also be used at the dead end of a rope such as a winch or crane.

Specifications

ELECTRICAL

  • Recommended excitation 10 Vdc.
  • Maximum excitation 15 Vdc.
  • Output at rated load 2.0mV/V
  • Zero balance 5% of RL
  • Input impedance 700ohms +/-20
  • Output impedance 700ohms +/- 3
  • Insulation >10^9ohms
  • Compensation temp range 10 to 60 C
  • Safe temp range -30 to 70 C

MECHANICAL

  • Safe overload 150% of RL
  • Ultimate overload 300% of RL
  • Deflection <0.5mm
  • Cable type 4 core screened
  • Cable length 10 M
  • Sealing IP68

Accuracy

  • Non linearity & hystersis 1.0%
  • Non repeatability 0.25%
  • Zero return (after 30 mins). 0.08%
  • Temp effect/10deg C on zero 0.05%
  • Temp effect/10deg C on span 0.03%

Wiring


Drawing


Dimensions