Excellence in Transducer Design
Load Cells : Force Sensors : Torque Sensors : Pressure Sensors
Load Cells : Force Sensors : Torque Sensors : Pressure Sensors
Range from 6mm to 12mm dia rope
Description
The small rope running line tensiometer is manufactured from high strength stainless steel. The rope can easily be applied to the transducer. It is fitted with a protection cover.
Specification
ELECTRICAL
• Recommended excitation 10 Vdc.
• Maximum excitation 15 Vdc.
• Output at rated load 1.5mV/V
• Zero balance 5% of RL
• Input impedance 350ohms +/-20
• Output impedance 350ohm +/-3
• Insulation >10^9ohms
• Compensation temp range 10 to 60 C
• Safe temp range -30 to 70 C
MECHANICAL
• Safe overload 150% of RL
• Ultimate overload 300% of RL
• Deflection <0.5mm
• Cable type 4 core screened
• Cable length 10 M
• Sealed IP67
Accuracy
• Non linearity & hysteresis 2.0%
• Non repeatability <0.25%
• Zero return (after 30 mins). 0.05%
• Temp effect/10deg C on zero 0.02%
• Temp effect/10deg C on span 0.02%
Wiring
Drawing
Additional Notes
Specification may change without notice
